Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Amana Dryer PF Error Code

PF usually records a power interruption rather than a failed dryer part. Clear or restart the cycle as the model allows, and use one documented breaker reset only if the message follows a recent outage.

Applies to Amana dryer showing PF after a power interruption

What the appliance detected

Detected condition

The dryer detected that the cycle or control power was interrupted.

What may contribute

Possible causes

  • A household outage or brief interruption stopped the drying cycle.
  • A startup voltage disturbance or line noise may have been detected by the control.
  • Repeated PF codes without a known outage can point to a household power or appliance electrical issue that needs diagnosis.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Clear or restart the interrupted cycle

    • If there was a known outage and the dryer is otherwise normal, use the model controls to restart the cycle or clear the display.
    • Inspect the power cord only from the outside for obvious damage. Do not open the terminal block or outlet.

  2. Use one documented power reset if needed

    • If PF remains after a recent outage, switch the dryer circuit breaker off for five minutes, then restore it.
    • If PF immediately returns, stop resetting the dryer and arrange qualified electrical or appliance service.

Actions not recommended

  • Do not repeatedly cycle the breaker to force the code away.
  • Do not open the dryer terminal block, receptacle, breaker panel, or energized wiring as a PF test.
  • Do not ignore a hot plug, damaged cord, arcing, or repeated breaker trip.

When to stop and request service

  • PF returns repeatedly without a known power interruption.
  • The dryer loses power during cycles, trips breakers, or has a damaged or overheating cord or plug.
  • A qualified electrician or appliance technician is needed to distinguish supply problems from an internal electrical fault.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: September 23, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Amana.

Think this information has changed? Report a correction.