Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Amana Range F2 E1 / F2E1 / E1 F2 / E1F2 Error Code

For F2 E1, begin with the manufacturer-documented exterior check on a fully cool range: confirm removable grates are seated correctly and stable. Then use one power reset if safe.

Applies to Amana range using the documented F2 E1 display

What the appliance detected

Detected condition

Amana says F2 E1 can involve the user interface or keypad, the control, or associated wiring; its range guidance also calls for checking that removable grates are installed correctly and level.

What may contribute

Possible causes

  • A removable grate may be installed incorrectly or not sit level on a supported range.
  • A possible user-interface, keypad, control, or associated-wiring condition.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Record the code and let the cooktop cool completely

    • Photograph F2 E1 and confirm the full model number.
    • Do not handle or reposition grates until the cooktop and grates are completely cool.

  2. Check removable grate seating only

    • On a cool range, gently verify that each removable grate is installed properly, level, and stable as Amana describes.
    • If a grate wobbles, use only the orientation documented for the model; do not bend, grind, shim, or modify it.

  3. Use one Amana-documented power reset

    • If there are no gas, electrical, overheating, or damage warning signs, turn the supplying breaker off for one minute and restore power.
    • Monitor the oven for one minute. If F2 E1 returns, stop resetting and request service.

Actions not recommended

  • Do not handle hot grates or modify a grate or cooktop with tools.
  • Do not remove panels or access the user interface, control, wiring, gas components, or internal parts.
  • Do not perform live-voltage, continuity, resistance, or gas-system testing.

When to stop and request service

  • F2 E1 returns after the documented cool-grate check and single power reset.
  • A grate cannot be made stable using the exact model instructions or the range shows another abnormal condition.
  • Stop using the appliance and seek qualified help for smoke, sparking, a burning smell, uncontrolled heating, repeated breaker trips, visible electrical damage, or abnormal heat. If you smell gas, leave the area and follow local gas-emergency guidance rather than operating switches.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: September 24, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Amana.

Think this information has changed? Report a correction.