Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Amana Range F8 / F 8 Error Code

F8 can be associated with the meat-probe connection. On a cool, idle oven, verify only the accessible probe connection described by Amana, then use one power reset if needed.

Applies to Amana range using the documented F8 meat-probe-related display

What the appliance detected

Detected condition

The range is reporting a condition associated with the meat-probe connection on supported models.

What may contribute

Possible causes

  • The meat probe may not be fully seated in its accessible receptacle on a supported model.
  • A persistent F8 display can require model-specific service beyond the owner-safe probe check.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Confirm the model and let the oven cool

    • Record F8 and the complete model number.
    • Wait until the oven interior, racks, probe, and receptacle area are cool enough to handle safely.

  2. Verify only the accessible meat-probe connection

    • If your model has the user-accessible meat probe described by Amana, confirm it is seated securely in its receptacle.
    • Do not remove liners, panels, receptacles, wiring, or insulation to inspect behind the connection.

  3. Use one documented power reset if needed

    • If the code remains and there are no electrical, gas, overheating, or damage warning signs, turn the supplying breaker off for one minute and restore power.
    • If F8 returns, request qualified service rather than repeating resets or internal testing.

Actions not recommended

  • Do not handle a hot probe, rack, receptacle, or oven interior.
  • Do not remove the probe receptacle, oven liner, panels, insulation, or wiring.
  • Do not test probe or receptacle circuits with live-voltage, continuity, or resistance procedures.

When to stop and request service

  • F8 returns after the accessible probe check and one documented reset.
  • The probe, receptacle, cord, or connector appears visibly damaged.
  • Stop using the appliance and seek qualified help for smoke, sparking, a burning smell, uncontrolled heating, repeated breaker trips, visible electrical damage, or abnormal heat. If you smell gas, leave the area and follow local gas-emergency guidance rather than operating switches.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: September 24, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Amana.

Think this information has changed? Report a correction.