What the appliance detected
Detected condition
A cooking zone overheated and protective logic switched it off.
What may contribute
Possible causes
- Extended or high-power cooking may have raised temperature around the zone.
- Hot cookware or trapped heat may contribute.
- Repeated overheating during ordinary use can require ventilation, sensor, or electronics diagnosis.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Stop and let the range cool
- Remove cookware only when safe and stop using the affected zone.
- Allow the electronics and surface to cool naturally.
Clear external heat traps
- Keep the control area and ventilation openings unobstructed according to the manual.
- Do not pour water on hot glass or force cooling with ice or wet towels.
Resume only after the message clears
- Bosch says the zone can be switched back on after the electronics cool sufficiently.
- If F1 or F6 returns during normal use, stop and arrange service.
Actions not recommended
- Do not remove the cooktop or access fans, sensors, wiring, or induction modules.
- Do not force-cool hot glass with water, ice, or cold wet materials.
- Do not keep restarting a zone that repeatedly shuts down from overheating.
When to stop and request service
- F1 or F6 repeats during normal cooking after adequate cooling.
- The surface or controls become abnormally hot, damaged, or emit burning odor.
- Ventilation, sensor, fan, or induction-electronics diagnosis is required.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
Bosch Owner Support
Bosch Slide-in Range Error CodesBosch Owner Support
Bosch Error Codes
Source reviewed by Appliance Help HQ: September 23, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Bosch.
Think this information has changed? Report a correction.