What the appliance detected
Detected condition
The washer control is reading the door as open.
What may contribute
Possible causes
- The door may not be fully closed.
- Clothing or debris may be caught in the door opening.
- The latch or striker may not be engaging normally.
- If the external door checks are normal but E41 remains, the washer may need service.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Record E41 and stop the washer
- Photograph E41 and note the complete model number.
- Wait for the drum to stop completely before inspecting the door opening.
Clear visible obstructions
- Remove clothing or debris caught between the door and opening.
- Do not force the door against an obstruction.
Close the door normally
- Close the door firmly without slamming it and listen for normal latch engagement.
- Inspect only the visible latch and striker for obvious damage; do not remove the lock assembly.
Actions not recommended
- Do not bypass the door lock or switch.
- Do not remove the front panel, door-lock assembly, or internal wiring.
- Do not slam or force a door that will not close normally.
When to stop and request service
- E41 remains after the door is fully closed and visible obstructions are removed.
- The latch or striker is visibly damaged or the door will not stay closed.
- Internal door-switch, lock, wiring, or control diagnosis would be required.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
Electrolux Owner Support
Laundry front loading washer displaying Error Code E41 door is open.
Source reviewed by Appliance Help HQ: September 23, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Electrolux.
Think this information has changed? Report a correction.