Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

JennAir Range F6 E0 Error Code

F6 E0 is an electronic-control/communication-family fault. The only homeowner action JennAir documents is a one-minute power reset before service if the code returns.

Applies to JennAir range or wall oven using the documented display family

What the appliance detected

Detected condition

JennAir says there may be a problem with the oven control, Appliance Manager, or associated wiring.

What may contribute

Possible causes

  • The oven control may be involved.
  • The Appliance Manager may be involved.
  • Associated internal wiring may be involved.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Preserve the evidence

    • Photograph F6 E0 and record the full model number.
    • Note whether the code followed a power interruption or another event.

  2. Reset once

    • Turn the supplying breaker off for one minute, restore power, and monitor for one minute.
    • If F6 E0 returns, stop resetting and request service.

Actions not recommended

  • Do not open control panels or inspect internal boards and wiring.
  • Do not perform live-voltage, continuity, or resistance tests.
  • Do not replace an Appliance Manager or oven control from the code alone.

When to stop and request service

  • F6 E0 returns after one reset.
  • Controls remain unavailable or erratic.
  • Internal control or wiring diagnosis is needed.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: September 24, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by JennAir.

Think this information has changed? Report a correction.