What the appliance detected
Detected condition
KitchenAid says there may be a problem with the Wi-Fi power module or associated wiring.
What may contribute
Possible causes
- The Wi-Fi power module may not be operating normally.
- Associated internal wiring or communication may be involved.
- A transient control state may clear after one documented power reset.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Confirm the model supports connected features
- Record FC E9 and the complete model number.
- Confirm from the owner literature that the appliance has the connected/Wi-Fi feature family associated with this code.
Power-cycle once
- Turn off the supplying breaker for one minute, restore power, and monitor for one minute.
- Verify normal external operation only.
Escalate a returning code
- If FC E9 returns, request service rather than opening the appliance or chasing internal wiring.
- If only app connectivity is affected without the code returning, use KitchenAid connected-appliance support for model-specific setup help.
Actions not recommended
- Do not open the Wi-Fi module compartment or control panels.
- Do not probe, reseat, or modify internal wiring or connectors.
- Do not replace the Wi-Fi module from FC E9 alone.
When to stop and request service
- FC E9 returns after one documented reset.
- The appliance has broader control or electrical symptoms.
- Internal Wi-Fi module, wiring, or control diagnosis is required.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
KitchenAid Product Help
FC E9 - Error Code - Range
Source reviewed by Appliance Help HQ: September 23, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by KitchenAid.
Think this information has changed? Report a correction.