Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Maytag Dryer F3 E2 Error Code

Maytag says F3 E2 can occur when five consecutive loads dry without registering moisture-sensor data. Leveling and very small loads can affect sensor contact.

Applies to Maytag dryer with automatic moisture sensing

What the appliance detected

Detected condition

The Maytag dryer did not register moisture-sensor data across consecutive automatic loads.

What may contribute

Possible causes

  • Very small loads or single items may not contact the moisture sensors.
  • A dryer that is not level may keep laundry from contacting the sensors.
  • A persistent moisture-sensor data problem may require service.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Record the exact dryer display

    • Photograph or write down the code or message before clearing it.
    • Confirm the full model number and owner manual because dryer codes and controls vary by model.

  2. Use only documented external checks

    • Try an appropriate larger load if the previous load was very small or a single item.
    • Confirm the dryer is level using a stable cabinet surface as the manual allows.
    • If the problem persists, Maytag documents one breaker power cycle before service.

  3. Stop before hazardous dryer work

    • If the code remains or returns after documented checks, request service.
    • Do not open panels, access internal wiring or heating parts, service gas components, or bypass thermal protections.

Actions not recommended

  • Do not test live voltage or open internal electrical areas.
  • Do not perform gas-valve, burner, heating-element, control-board, or thermal-limiter repair.
  • Do not treat the code as proof that one specific internal component failed.

When to stop and request service

  • F3 E2 returns after load-size, level, and one documented power-cycle check.
  • The dryer cannot be leveled safely.
  • Internal sensor or wiring diagnosis would be required.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: August 18, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Maytag.

Think this information has changed? Report a correction.