What the appliance detected
Detected condition
The dishwasher is detecting its internal temperature incorrectly.
What may contribute
Possible causes
- The dishwasher detected an incorrect temperature reading.
- A temperature-sensing, heater-control, wiring, or related internal condition may require service if the code persists.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Record the exact tE display
- Photograph the code before clearing it and confirm the model.
- Stop for abnormal heat, steam, burning odor, sparks, leakage, or water near electrical parts.
Run the documented empty Normal cycle once
- Empty the dishwasher.
- Add automatic-dishwasher detergent and run one Normal cycle if there are no hazard signs, following Samsung’s published guidance.
Switch off power if tE returns
- If tE still occurs, switch off power to the dishwasher at the circuit breaker.
- Request Samsung service instead of repeatedly cycling or resetting the appliance.
Actions not recommended
- Do not access or meter the temperature sensor, heater, wiring, or control board.
- Do not test live voltage, resistance, or continuity inside the dishwasher.
- Do not replace a sensor or heater based on tE alone.
When to stop and request service
- tE returns after the documented empty Normal cycle.
- There is abnormal heat, smoke, burning odor, sparking, leakage, or repeated breaker tripping.
- Any next step requires sensor, heater, wiring, or control access.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
Samsung Support
Samsung dishwasher is displaying an error code
Source reviewed by Appliance Help HQ: September 24, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Samsung.
Think this information has changed? Report a correction.