Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Whirlpool Range F2 E1 / F2E1 / E1 F2 / E1F2 Error Code

For F2 E1, begin with the only documented exterior mechanical check: on a fully cool range, confirm the removable grates are seated correctly and stable. Then use one documented power reset if safe.

Applies to Whirlpool range using the documented F2 E1 display

What the appliance detected

Detected condition

Whirlpool says F2 E1 may be associated with the user interface or keypad, the control, or associated wiring; its range guidance also calls for checking that removable grates are installed properly and level.

What may contribute

Possible causes

  • A removable grate may be installed incorrectly or not sit level on a supported range.
  • A possible user-interface, keypad, control, or associated-wiring condition.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Confirm the model and let the cooktop cool completely

    • Record F2 E1 and the full model number before changing anything.
    • Do not handle or reposition grates until the cooktop and grates are fully cool.

  2. Check removable grate seating only

    • On a cool range, gently check whether each removable grate is properly installed, level, and stable as Whirlpool describes.
    • If a grate wobbles, use only the model-documented orientation; do not modify the grate or cooktop.

  3. Use one Whirlpool-documented power reset

    • If there are no gas, electrical, overheating, or damage warning signs, turn the supplying breaker off for one minute and restore power.
    • Monitor the oven for one minute. If F2 E1 returns, stop resetting and request service.

Actions not recommended

  • Do not handle hot grates or use tools to bend, grind, shim, or alter a grate or cooktop.
  • Do not remove panels or access the user interface, control, wiring, gas components, or internal parts.
  • Do not perform live-voltage, continuity, resistance, or gas-system testing.

When to stop and request service

  • F2 E1 returns after the documented grate check and single power reset.
  • A grate cannot be made stable using the exact model instructions or the range has another abnormal condition.
  • Stop immediately for a gas odor, smoke, sparking, burning smell, uncontrolled heating, repeated breaker trips, or visible damage.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: September 23, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Whirlpool.

Think this information has changed? Report a correction.