Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Maytag Refrigerator F Error Code

Maytag says to reset power once for a flashing F, ensure cooling is on, and schedule service if the problem persists.

Applies to Maytag full-size refrigerator

What the appliance detected

Detected condition

The refrigerator display is showing a flashing F-code condition.

What may contribute

Possible causes

  • The control detected a fault condition represented by a flashing F.
  • The public Maytag guidance does not identify a homeowner-repairable component for this alert.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Record the display and model

    • Photograph or write down the exact alert, word, or code before clearing it.
    • Confirm the full model number and Maytag owner manual because controls vary by refrigerator family.

  2. Use only documented external checks

    • Disconnect power for one minute if the plug or breaker can be used safely.
    • Restore power and ensure the cooling function is turned on.
    • Monitor for one minute to see whether the code displays again.

  3. Stop before internal work

    • If the alert remains after documented checks, request service.
    • Do not open sealed-system, compressor, fan, sensor, wiring, or control areas.

Actions not recommended

  • Do not perform refrigerant or sealed-system work.
  • Do not test live voltage or open internal electrical areas.
  • Do not replace compressor, fan, sensor, water-valve, or control parts based only on the display.

When to stop and request service

  • The flashing F returns after one documented power reset.
  • Cooling is not operating normally.
  • Any internal electrical, fan, sensor, compressor, or sealed-system diagnosis would be needed.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: August 17, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Maytag.

Think this information has changed? Report a correction.