Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Bosch Dryer E06 Error Code

Bosch identifies E06 as a heating-circuit fault and says the fault can only be eliminated by an authorized technician. There is no Bosch-supported internal homeowner repair for this code.

Applies to Bosch dryer whose exact model documentation uses the listed display

What the appliance detected

Detected condition

The dryer reports a fault or error in the heating circuit.

What may contribute

Possible causes

  • The dryer has detected a heating-circuit fault.
  • The exact component or electrical cause requires professional diagnosis.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Record the display and Bosch model

    • Photograph or write down E06 before clearing it.
    • Confirm the complete model number and owner manual because Bosch dryer displays and owner procedures vary by model and family.

  2. Use only Bosch-supported owner checks

    • Stop the cycle and record E06 and the complete model number.
    • Do not open the dryer or attempt electrical, heating-element, thermostat, gas, or live-voltage checks.
    • Contact Bosch support or an authorized service provider.

  3. Respect the dryer service boundary

    • Stop if a check would require removing a panel, reaching internal wiring, testing live voltage, or accessing a heating or gas system.
    • If the display remains or returns after the documented owner check, contact Bosch support or qualified dryer service.

Actions not recommended

  • Do not assume the display applies to another Bosch dryer without checking its exact manual.
  • Do not remove rear or service panels, press an internal reset, or bypass a control or safety device.
  • Do not test mains voltage, capacitors, controls, heating circuits, gas components, or internal wiring.

When to stop and request service

  • E06 is displayed.
  • The dryer does not heat, overheats, stops unexpectedly, or produces an unusual odor.
  • Any internal heating-circuit, control, wiring, sensor, gas, or power-supply diagnosis is required.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: August 25, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Bosch.

Think this information has changed? Report a correction.