What the appliance detected
Detected condition
The dishwasher reports a loss of power.
What may contribute
Possible causes
- Power to the dishwasher may have been interrupted.
- A breaker, fuse, outlet, or household power event may have affected the appliance.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Record the display and model
- Photograph or write down the exact code or message before clearing it.
- Confirm the full model number and Frigidaire owner manual before taking model-specific action.
Use only documented external checks
- Press START/CANCEL as Frigidaire documents to clear the message.
- If there was a recent outage, confirm household power is stable before restarting.
- Check only normal power access such as a breaker or plug if safely accessible.
Stop before internal work
- If the code remains after documented checks, request support or service.
- Do not remove panels, bypass latches, or access wiring, pumps, heaters, controls, or internal components.
Actions not recommended
- Do not reach into wet areas while power is connected.
- Do not open electrical, pump, heater, latch, or control areas.
- Do not replace parts based only on the displayed code or message.
When to stop and request service
- PF returns repeatedly without an obvious household power interruption.
- The dishwasher has no power after safe breaker or plug checks.
- Electrical diagnosis beyond normal homeowner access would be needed.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
Frigidaire Owner Support
Dishwasher Error Codes and Alarms GuideFrigidaire Owner Support
Dishwasher Error Code PF - Loss of Power
Source reviewed by Appliance Help HQ: August 17, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Frigidaire.
Think this information has changed? Report a correction.