Appliance Help HQ
Menu
ENEnglishESEspañolPT-BRPortuguês

Source-backed error-code guide

Reviewed

Maytag Washer F8 E1 / LO FL Error Code

Maytag says F8 E1 or LO FL means the washer is sensing low water flow.

Applies to Maytag front-load washer

What the appliance detected

Detected condition

The washer senses low water flow.

What may contribute

Possible causes

  • Hot or cold water supply may not be fully open.
  • Inlet hoses may be kinked.
  • Flood-safe devices or supply restrictions may affect fill.

Start conservatively

Safe preliminary checks

Work in order and stop whenever a step is not supported by the documentation for your model.

  1. Record the display and model

    • Photograph or write down the exact code before clearing it.
    • Confirm the full model number and Maytag owner manual before taking model-specific action.

  2. Use only the documented external checks

    • Confirm hot and cold water faucets or valves are fully open.
    • Check visible inlet hoses for kinks.
    • Confirm the water-line setup matches Maytag guidance and the exact model manual.

  3. Stop before internal work

    • If the code remains after documented checks, request service.
    • Do not remove panels, bypass locks, or access wiring or internal components.

Actions not recommended

  • Do not bypass the lid or door lock.
  • Do not open panels, access wiring, or test live electrical parts.
  • Do not replace components based only on the code.

When to stop and request service

  • The code remains after water supply and visible hoses are corrected.
  • Any inlet valve, pressure, wiring, or internal diagnosis would be needed.

Documented source

Official information reviewed

Our summary is based on manufacturer support material and stays within the limits of that material.

Source reviewed by Appliance Help HQ: August 17, 2026.

Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Maytag.

Think this information has changed? Report a correction.