What the appliance detected
Detected condition
The dryer reports a possible user-interface or associated-wiring issue.
What may contribute
Possible causes
- The user-interface controls may not start the dryer normally.
- Associated wiring or internal control issues may require service.
- The condition may persist after normal control attempts.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Record the exact code
- Write down F2 E4 or F2E4 and the model number.
- Do not clear the code repeatedly before service if it returns.
Use normal controls only
- Touch Power, select a cycle, and hold Start/Pause as Whirlpool documents.
- If this is unsuccessful, unplug the dryer if the plug is safely accessible.
Request service if it continues
- If normal controls and safe power disconnection do not resolve the alert, request service.
- Do not open the console or inspect wiring.
Actions not recommended
- Do not open the control console.
- Do not access associated wiring or electronic controls.
- Do not test live parts or replace boards based on the code alone.
When to stop and request service
- F2 E4 returns after normal control attempts.
- The dryer is unresponsive or cannot be safely powered off.
- Any user-interface or wiring inspection would be required.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
Whirlpool Product Help
F2E4 - Error Code - Dryer
Source reviewed by Appliance Help HQ: August 17, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Whirlpool.
Think this information has changed? Report a correction.