What the appliance detected
Detected condition
The washer reports a motor-speed sensing error.
What may contribute
Possible causes
- Shipping bolts may not have been removed on applicable front-load installations.
- The washer may be overloaded.
- A persistent motor-speed sensing condition may require service.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Record the display and model
- Photograph or write down the exact code before clearing it.
- Confirm the full model number and Maytag owner manual before taking model-specific action.
Use only the documented external checks
- Confirm the load is not overloaded.
- For a newly installed front-load washer, confirm shipping bolts were removed according to the installation instructions.
- Clear the code with the documented controls only after the safe external checks.
Stop before internal work
- If the code remains after documented checks, request service.
- Do not remove panels, bypass locks, or access wiring or internal components.
Actions not recommended
- Do not bypass the lid or door lock.
- Do not open panels, access wiring, or test live electrical parts.
- Do not replace components based only on the code.
When to stop and request service
- F7 E1 returns after load size and installation basics are corrected.
- Any motor, wiring, or control diagnosis would be needed.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
Maytag Product Help
Error Codes in Front Load Washers
Source reviewed by Appliance Help HQ: August 17, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Maytag.
Think this information has changed? Report a correction.