What the appliance detected
Detected condition
Drain time is longer than expected.
What may contribute
Possible causes
- Drain hose may be kinked or clogged.
- Drain hose form or standpipe height may not match installation requirements.
- Excessive suds may delay draining.
Start conservatively
Safe preliminary checks
Work in order and stop whenever a step is not supported by the documentation for your model.
Record the display and model
- Photograph or write down the exact code before clearing it.
- Confirm the full model number and Maytag owner manual before taking model-specific action.
Use only the documented external checks
- Check the visible drain hose for kinks or obvious blockage.
- Compare the drain hose form and standpipe height with the model installation instructions.
- Address excessive suds with HE detergent and correct amount.
Stop before internal work
- If the code remains after documented checks, request service.
- Do not remove panels, bypass locks, or access wiring or internal components.
Actions not recommended
- Do not bypass the lid or door lock.
- Do not open panels, access wiring, or test live electrical parts.
- Do not replace components based only on the code.
When to stop and request service
- F9 E1 continues after visible drain installation and suds issues are addressed.
- Pump, internal hose, wiring, or control diagnosis would be required.
Documented source
Official information reviewed
Our summary is based on manufacturer support material and stays within the limits of that material.
Maytag Product Help
Error Codes in Front Load Washers
Source reviewed by Appliance Help HQ: August 17, 2026.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Maytag.
Think this information has changed? Report a correction.