Amana · Microwave
E03 / SE / F2 E1 / F2 Q1 error-code guide
Amana identifies E03, SE, F2 E1, and F2 Q1 as user-interface, keypad, or touchpad conditions on applicable over-the-range microwave platforms.
Read the guideCurrent Amana microwave coverage
Published Amana microwave guides
This hub contains 11 published guides for select Amana microwave error codes. Coverage is intentionally limited and does not include all codes or models.
Microwave runs but food stays cold? Use the microwave not-heating symptom guide.
Microwave will not begin a cook cycle? Use the microwave won’t-start symptom guide.
Seeing sparks or arcing instead of a code? Use the microwave arcing safety guide.
Source-backed guides
Choose the code shown on the appliance
Each card links to a guide that separates the detected condition from possible causes, preliminary checks, limitations, and service boundaries.
Amana · Microwave
E21 / E22 error-code guide
Amana states that E21 reports an open thermal-sensor circuit and E22 reports a shorted thermal-sensor circuit to the control board.
Read the guideAmana · Microwave
E24 error-code guide
Amana states that E24 means the microwave reached an overheat condition of 500°F (260°C).
Read the guideAmana · Microwave
E61 / E62 error-code guide
Amana states that E61 reports an open oven-sensor circuit and E62 reports a shorted oven-sensor circuit to the control board.
Read the guideAmana · Microwave
F2 H2 error-code guide
Amana associates F2 H2 with the vent-fan and light-switch input path or its associated wiring.
Read the guideAmana · Microwave
F3 H1 error-code guide
Amana associates F3 H1 with the humidity-sensor path or its associated wiring.
Read the guideAmana · Microwave
F4 E1 error-code guide
Amana associates F4 E1 with the cavity-temperature thermistor or its associated wiring.
Read the guideAmana · Microwave
F6 / F6 E0 / F7 / F9 error-code guide
Amana documents F6 as a relay-control execution fault, F6 E0 and F7 as appliance-control execution faults, and F9 as an execution fault that may involve the appliance control board, relay control board, or associated wiring.
Read the guideAmana · Microwave
F8 E5 error-code guide
Amana associates F8 E5 with the exhaust-air temperature sensor or its associated wiring.
Read the guideAmana · Microwave
DOOR / OPEN/CLOSE DOOR status-message guide
Amana says a DOOR or OPEN/CLOSE DOOR message can appear when the door has remained closed for five minutes or more without a cycle being started, and it can also persist when the door is not fully closing.
Read the guideAmana · Microwave
PF / FLASHING : status-message guide
Amana states that PF or a flashing colon indicates a power failure or that the clock time has been turned off on applicable models.
Read the guideHow to use this collection
Sources, context, and safety remain part of every guide
Documented context
Each guide identifies the manufacturer support material reviewed and explains where that material has model or applicability limits.
Clear safety boundaries
Homeowner observations remain separate from disassembly, electrical work, internal testing, and other work that belongs with a qualified professional.
Appliance Help HQ is an independent informational site and is not affiliated with or endorsed by Amana.